基于CC1310的供水管道泄露检测定位系统设计与实现

基于CC1310的供水管道泄露检测定位系统设计与实现

投稿时间：2018-03-01 修订日期：2018-04-10 点此下载全文

引用本文：

摘要点击次数: 121

全文下载次数: 0

作者	单位	邮编
贺帆^*	陕西师范大学物理学与信息技术学院	710119

中文摘要:基于TI公司的无线通信芯片CC1310，设计与实现了一个低成本的供水管道无线泄露检测定位系统。该系统由传感器节点?集中器以及无线网关组成。其中传感器与集中器节点采用CC1310芯片实现，网关由ESP8266模块实现。检测数据由ESP8266模块传输到PC上位机，最后上位机对传感器节点与集中器的测量数据进行互相关性计算，并由此进行泄漏的判定与定位。初步的实验测试表明，该系统能够发现供水管道的泄漏状况，同时其定位能力也满足实际需求。

中文关键词:泄漏检测 CC1310模块 ESP8266模块互相关计算

Design and implementation of leak detection and location system for water supply pipeline based on CC1310

Abstract:Based on the wireless communication chip CC1310 of TI company, a low cost wireless leak detection and location system for water supply pipeline is designed and realized. The system consists of sensor nodes, gateway and wireless concentrator. The sensor and concentrator nodes are implemented by CC1310 chip, and the gateway is implemented by the ESP8266 module. The detection data is transferred from ESP8266 module to PC host computer. Finally, the upper computer calculates cross-correlation between sensor nodes and concentrator measurement data, and then determines and locate leakage. The preliminary experimental test shows that the system can find the leakage of water supply pipeline, and its positioning ability also meets the actual demand.

keywords:Leakage detection CC1310 module ESP8266 module intercorrelation calculation

查看全文 查看/发表评论 下载pdf阅读器