基于LCC-S补偿拓扑MCR-WPT系统的宽范围阻抗匹配研究

仇雪颖; 乔康恒; 孙  盼; 孙  军; 张筱琛

基于LCC-S补偿拓扑MCR-WPT系统的宽范围阻抗匹配研究

引用本文：仇雪颖，乔康恒，孙盼，孙军，张筱琛.基于LCC-S补偿拓扑MCR-WPT系统的宽范围阻抗匹配研究[J].计算技术与自动化,2022,(2):7-13

摘要点击次数: 549

全文下载次数: 0

作者	单位
仇雪颖，乔康恒，孙盼，孙军，张筱琛	（海军工程大学电气工程学院，湖北武汉 430000）

中文摘要:针对LCC-S型拓扑网络的实际负载值偏离最优负载的问题，利用后级级联Sepic变换器实现了宽范围阻抗匹配，并由前级直流输入电源控制输出稳压。首先，利用互感模型分析了LCC-S型拓扑谐振状态下的网络特性，得到传输特性及最优负载值；其次，对后级Sepic变换器在开关管导通和断开时的工作模式进行分析，阐释了Sepic电路实现宽范围阻抗匹配的原理，并推导了占空比D表达式；最后，利用MATLAB仿真验证了LCC-S型拓扑的恒压特性以及宽范围阻抗匹配理论和控制方案的可行性。

中文关键词:LCC-S Sepic变换器最优负载阻抗匹配

Research on Wide-range Impedance Matching of MCR-WPT System Based on LCC-S Compensation Topology

Abstract:Aiming at the problem that the actual load value of LCC-S topology network deviates from the optimal load, a wide range impedance matching is realized by using the cascaded Sepic converter, and the output voltage is controlled by the front DC input power supply.Firstly, the mutual inductance model is used to analyze the network characteristics under LCC-S topology resonant state, and the transmission characteristics and the optimal load value are obtained.Secondly, the working mode of the later stage Sepic converter when the switch is on and off is analyzed, the principle of Sepic circuit to realize wide range impedance matching is explained, and the expression of duty cycle D is deduced.Finally, the constant voltage characteristics of LCC-S topology and the feasibility of wide range impedance matching theory and control scheme are verified by MATLAB simulation.

keywords:LCC-S Sepic converter optimal load impedance matching

查看全文 查看/发表评论 下载pdf阅读器